Solid Carbide Flat Endmill 0X
- Micro Grain (MG) Carbide Substrate
- Carbide End Mills produced from this substrate are meant for General Milling applications
- These Carbide End Mills are meant for Shorter Batch Runs ; if you are looking for Higher Production Runs or High performance milling then go for our 3X Grade of End Mills.
122-4-Flute-GP-Stainless Steel-Solid Carbide Flat End Mills-Metric-Upto-4mm
- 4-F Carbide End Mills comes with Nova coating
- Economical Carbide Endmill to be used for softer materials up to 45-HRc
- 40% higher Productivity compared to 101 Series Carbide endmill
- Good for milling metals like MS, Cast Iron, Alloy Steel and other easy to machine materials
- Optimum performance on all kind of General Milling applications
122-4-Flute-GP-Stainless Steel-Solid Carbide Flat End Mills-Metric-4.1-to-9.9mm
- 4-F Carbide End Mills comes with Nova coating
- Economical Carbide Endmill to be used for softer materials up to 45-HRc
- 40% higher Productivity compared to 101 Series Carbide endmill
- Good for milling metals like MS, Cast Iron, Alloy Steel and other easy to machine materials
- Optimum performance on all kind of General Milling applications
122-4-Flute-GP-Stainless Steel-Solid Carbide Flat End Mills-Metric-10mm-Above
- 4-F Carbide End Mills comes with Nova coating
- Economical Carbide Endmill to be used for softer materials up to 45-HRc
- 40% higher Productivity compared to 101 Series Carbide endmill
- Good for milling metals like MS, Cast Iron, Alloy Steel and other easy to machine materials
- Optimum performance on all kind of General Milling applications
114-2-Flute GP-0X Carbide Compression or Up-Down Cut Router Bits-Metric
- These are Up-Down Cut Router Bits or most Commonly called Compression Router Bits
- Compression Router Bits prevent Delamination of top and bottom surfaces hence gives you cleaner cuts
- Compression bits prevents chipping of Bottom & Top surfaces thus preventing losses
- These Router Bits can be used for MDF, Wood, Laminates, ACP etc.
118-2-Flute GP-0X Solid Carbide Straight Flute End Mills for Hard Wood-Metric
- These are Straight Fluted Carbide Router bits for machining Hardwood, Softwood, Teak, MDF etc.
- Straight Fluted Router Bits comes with special cutting edge geometry to give you best finish on your Wooden Jobs
- Good Economical Router bits then Upcut or Downcut router bits for all your General Wooden Work
- Better choice when upward or downward force is not desirable on your router jobs
- Smaller Sizes also known as veining router bits which can be used for fine wood carving with your router and other delicate work.
103-2-Flute GP-0X Carbide UpCut Woodworking Router Bits-Metric
- 2-Flute Uncoated Carbide Wood working UpCut Router Bits
- Carbide UpCut Router Bits best suited for non-ferrous milling at affordable prices especially designed for all types of Wood Working Applications
- These Carbide Router Bits are best for milling Hardwood, Softwood, MDF, Aluminum, Acrylic and other non-ferrous materials
- RIGPL also manufactures Straight flute, Single Flute, Ball type and other router bits.